На этом сайте используются cookies и сервис веб-аналитики Яндекс.Метрика, чтобы сделать посещение более удобным. Нажимая кнопку «СОГЛАСЕН» или продолжая пользоваться сайтом, Вы подтверждаете то, что Вы проинформированы об использовании cookies и Яндекс.Метрики на нашем сайте.
«Автоматизация и измерения в машино- приборостроении» - научный журнал, посвященный актуальным вопросам науки и техники. В постоянных рубриках журнала освещаются результаты теоретических и экспериментальных исследований в области автоматизации и управления технологическими процессами и производством, построения моделей сложных технических систем, разработки информационно-измерительных систем и изделий медицинской техники. Журнал предназначен для научных работников, специалистов, преподавателей, аспирантов и студентов, специализирующихся на решении фундаментальных и прикладных задач в области автоматизации, машиностроения, приборостроения, информационных технологий и управления.
Журнал основан 12.10.2018.
ISSN (international Standard Serial Number): 2658-4727 (print)
Объем до 120 страниц
Периодичность издания – 4 раза в год.
Журнал зарегистрирован Федеральной службой по надзору в сфере связи, информационных технологий и массовых коммуникаций, свидетельство ПИ №ФС77-73958 от 12.10.2018
Издание включено в Российский индекс научного цитирования (РИНЦ)
Учредитель и издатель:
Федеральное государственное автономное образовательное учреждение высшего образования «Севастопольский государственный университет».
Политика журнала:
Публикуемые материалы проходят процедуру рецензирования и экспертного отбора.
Авторы несут ответственность за добросовестность фактов, цитат, имен собственных, географических названий и другой информации. Редакция не несет ответственности за нарушение авторами исключительных прав на результаты интеллектуальной деятельности третьих лиц.
Мнение редакции может не совпадать с мнением автора.
При перепечатке материалов ссылка на журнал «Автоматизация и измерения в машино- приборостроении» обязательна.
Каждый выпуск журнала (16 экз.) в обязательном порядке рассылается в Российскую Книжную палату.
Научный журнал входит в «Перечень рецензируемых научных изданий, в которых должны быть опубликованы основные результаты диссертаций на соискание ученой степени кандидата наук, на соискание ученой степени доктора наук», утвержденный ВАК Минобрнауки РФ, по следующим научным специальностям:
1.2.2. Математическое моделирование, численные методы и комплексы программ производствами (технические науки);
2.2.8. Методы и приборы контроля и диагностики материалов, изделий, веществ и природной среды производствами (технические науки);
2.3.3 Автоматизация и управление технологическими процессами и производствами (технические науки).
Основные разделы:
Автоматизация и управление процессами и производствами
Математическое моделирование, численные методы и комплексы программ
Приборы и методы измерения
Контакты:
Адрес редакции: 299053, г. Севастополь, ул. Университетская, 33, редакция журнала «Автоматизация и измерения в машино- приборостроении»
E-mail: appr.sevgu@yandex.ru
Телефон: 8 (8692) 43 50 02
Главный редактор научного журнала «Автоматизация и измерения в машино- приборостроении» - кандидат технических наук, доцент
Филипович Олег Викторович.

Закончил с отличием Севастопольский государственный технический университет в 1998 году по специальности «Автоматизация технологических процессов и производств». Начало трудовой деятельности в университете – 2001 год, после окончания очной аспирантуры. Кандидат наук (2006г.), доцент (2008г.). Общий стаж преподавательской работы в ВУЗе составляет 26 лет.
Область научных интересов: моделирование и оптимизация процессов селективной сборки изделий. Тема докторской диссертации – «Математические модели процессов многоэлементной однопараметрической селективной сборки» (специальность 1.2.2 Математическое моделирование, численные методы и комплексы программ). Результаты научной и учебно-методической работы отражены в 190 публикациях, среди которых 3 монографии, 4 учебных пособия, 95 статей, 4 патента, 8 свидетельств о государственной регистрации программ. Имеет опыт руководства и участия в 10 научных проектах (госбюджетные финансируемые НИР, базовая часть госзадания, внутренние гранты университета, гранты РФФИ).
За многолетнюю и безупречную работу в университете, высокий профессиональный уровень в организации учебного процесса и административной деятельности награжден двумя почетными грамотами ректора Севастопольского государственного университета.
Состав редколлегии:
– главный редактор: Филипович О.В., кандидат технических наук, доцент, Севастопольский государственный университет, Севастополь
– заместитель главного редактора: Балакин А.И., кандидат технических наук, доцент, Севастопольский государственный университет, Севастополь
– научный редактор: Бохонский А.И., доктор технических наук, профессор, Севастопольский государственный университет, Севастополь
– члены редколлегии:
Вартанов М.В., доктор технических наук, профессор, Московский политехнический университет, Москва;
Греков Н.А., доктор технических наук, профессор, Институт природно-технических систем, Севастополь;
Доронина Ю.В., доктор технических наук, доцент, Севастопольский государственный университет, Севастополь;
Жмудь В.А., доктор технических наук, доцент, Сибирский государственный университет телекоммуникаций и информатики, Новосибирск;
Краснодубец Л.А., доктор технических наук, профессор, Севастопольский государственный университет, Севастополь;
Моисеев Д.В., доктор технических наук, доцент, Севастопольский государственный университет, Севастополь;
Обжерин Ю.Е., доктор технических наук, профессор, Севастопольский государственный университет, Севастополь;
Осипов К.Н., доктор технических наук, доцент, Черноморское высшее военно-морское ордена Красной звезды училище имени П.С. Нахимова, Севастополь;
Песчанский А.И., доктор технических наук, профессор, Севастопольский государственный университет, Севастополь;
Петрешин Д.И., доктор технических наук, профессор, Брянский государственный технический университет, Брянск;
Прейс В.В., доктор технических наук, профессор, Тульский государственный университет, Тула;
Щенятский А.В., доктор технических наук, профессор, Ижевский государственный технический университет имени М.Т. Калашникова, Ижевск;
Заморёнов М.В., кандидат технических наук, доцент, Севастопольский государственный университет, Севастополь;
Майстришин М.М., кандидат технических наук, доцент, Севастопольский государственный университет, Севастополь;
Рапацкий Ю.Л., кандидат технических наук, доцент, Севастопольский государственный университет, Севастополь.
ПРАВИЛА
направления, рецензирования и опубликования научных статей
в журнале «Автоматизация и измерения в машино- приборостроении»
К публикации принимаются научные и научно-технические статьи, отражающие результаты исследований, проведенных автором (авторами), которые должны соответствовать тематике журнала.
Авторы должны предоставлять оригинальные работы, содержащие достоверные результаты проделанной научной работы. При использовании текстовой или графической информации, заимствованной из работ других лиц, необходимы ссылки на соответствующие публикации. Если элементы рукописи ранее уже были опубликованы, то авторам необходимо сослаться на более раннюю работу, указав отличие новой работы от предыдущих.
Подача статьи в более чем один журнал является неприемлемой и расценивается как неэтичное поведение авторов.
Для публикации статьи в журнале в редакцию представляются в электронном виде:
текст статьи с подписями всех авторов (файл с расширением .pdf);
текст статьи (файл с разрешением .docx либо .doc);
экспертное заключение о возможности опубликования материалов статьи в открытой печати (файл с расширением .pdf);
письменная рекомендация научного руководителя (для аспирантов, магистрантов и студентов, публикующих без соавторов) (файл с расширением .pdf);
пакет рисунков и иллюстраций (файлы tiff, jpg с разрешением растровых иллюстраций не ниже 300 dpi).
Требования к содержанию статьи
Представляемая для публикации статья должна:
быть актуальной, обладать новизной;
содержать постановку задач (проблем), цель, описание основных результатов исследования, полученных автором, выводы;
Представленные статьи проходят проверку в программе «Антиплагиат». Предельно допустимый уровень неоформленных ссылками заимствований – до 30% текста статьи.
Порядок приема статей
Рукопись статьи должна быть представлена одним из соавторов, принимающим на себя ответственность за статью в ходе ее подачи и рецензирования.
Редакция принимает ранее не опубликованные научные статьи на e-mail редакции (appr.sevgu@yandex.ru) без ограничения в течение года и в случае положительной рецензии включает в очередной номер журнала в порядке поступления.Аспиранты и студенты, публикующие статьи без соавторов-руководителей, вместе с текстом статьи предоставляют в редакцию журнала письменную рекомендацию, которая должна быть подписана научным руководителем.
Отказ в публикации
Не допускаются к публикации:
Редакция обязуется сохранять конфиденциальность личных данных рецензентов. Возможно раскрытие имени рецензента по его желанию. Статья передается рецензенту без указания каких-либо сведений об авторах.
Рукописи всех статей, поступивших в редакцию, подлежат обязательному рецензированию.
При выборе рецензента учитывается наличие у эксперта в течение последних трех лет публикаций по тематике рецензируемой работы. Рецензирование может осуществляться членами редакционной коллегии журнала. К внешнему рецензированию привлекаются специалисты, имеющие признанный авторитет и работающие в области знаний, к которой относится содержание рукописи.
Оригиналы рецензий хранятся в редакции в течение пяти лет со дня публикации статей.
Редакция издания направляет авторам представленных материалов копии рецензий или мотивированный отказ, а также обязуется направлять копии рецензий в Министерство науки и высшего Российской Федерации при поступлении в редакцию издания соответствующего запроса.
Рецензирование статей выполняется на добровольной и безвозмездной основе. Рецензенты уведомляются о том, что направленные им рукописи являются интеллектуальной собственностью авторов и относятся к сведениям, не подлежащим разглашению. Рецензентам не разрешается делать копии рукописи статьи для своих нужд, а также передавать третьим лицам рукопись полностью или частично.
Процедура рецензирования конфиденциальна. Рецензия предоставляется автору рукописи без подписи и указания фамилии, должности, места работы рецензента. Редакция не сообщает информацию, касающуюся рукописи (включая сведения о ее получении, содержании, процессе рецензирования, критических замечаниях рецензентов и окончательном решении), никому, кроме самих авторов и рецензентов.
Сроки рецензирования
Сроки рецензирования в каждом отдельном случае определяются ответственным секретарем с учетом создания условий для максимально оперативной публикации статьи. Максимальный срок рецензирования составляет три недели.
Содержание рецензии
Рецензия составляется в свободной форме, с обязательным освещением следующих положений:
Редакция доводит до сведения автора результат рецензирования. Статьи, доработанные автором, повторно направляются на рецензирование тому же рецензенту, который делал критические замечания. Статья, направленная автору на доработку, должна быть возвращена в исправленном виде в максимально короткие сроки, но не позднее двух недель после получения автором рецензии. К переработанной рукописи необходимо приложить письмо от авторов, содержащее ответы на все замечания и поясняющее все изменения, сделанные в статье. Редакционная коллегия оставляет за собой право отклонения статей в случае неспособности или нежелания автора учесть пожелания рецензента, а также в случае получения скорректированного варианта рукописи, позднее, чем через месяц после получения первой рецензии.
В случае отрицательной оценки рукописи в целом (рекомендация о нецелесообразности публикации) рецензент должен обосновать свои выводы. Статья, не рекомендованная рецензентом к публикации, к повторному рассмотрению не принимается. Текст отрицательной рецензии направляется автору по электронной почте.
Срок принятия решения о публикации – не более месяца.
Порядок рассмотрения статей
Статьи регистрируются в порядке поступления в редакцию и публикуются по установленному графику.
Редакционная коллегия отправляет статью на рецензирование.
Редакционная коллегия правомочна осуществлять научное и литературное редактирование поступивших материалов, при необходимости сокращать их по согласованию с автором либо направлять статью на доработку.
Редакционная коллегия оставляет за собой право отклонить статью, не отвечающую установленным требованиям или тематике журнала, а также если рекомендации рецензентов не выполнены более двух раз. В случае отклонения представленной статьи редакционная коллегия дает автору мотивированное заключение.
Редакция сообщает авторам о результатах рецензирования и соответствии требованиям в течение двух недель после регистрации статьи.
Статьи, получившие положительную рецензию, публикуются в очередном выпуске журнала в порядке поступления.
Том 1 - 2018 (скачать журнал) (скачать содержание) (аннотации)
Том 2 - 2018 (скачать журнал) (скачать содержание) (аннотации)
Том 3 - 2018 (скачать журнал) (скачать содержание) (аннотации)
Том 4 - 2018 (скачать журнал) (скачать содержание) (аннотации)
Том 5 - 2019 (скачать журнал) (скачать содержание) (аннотации)
Том 6 - 2019 (скачать журнал) (скачать содержание) (аннотации)
Том 7 - 2019 (скачать журнал) (скачать содержание) (аннотации)
Том 8 - 2019 (скачать журнал) (скачать содержание) (аннотации)
Том 9 - 2020 (скачать журнал) (скачать содержание) (аннотации)
Том 10 - 2020 (скачать журнал) (скачать содержание) (аннотации)
Том 11 - 2020 (скачать журнал) (скачать содержание) (аннотации)
Том 12 - 2020 (скачать журнал) (скачать содержание) (аннотации)
Том 13 - 2021 (скачать журнал) (скачать содержание) (аннотации)
Том 14 - 2021 (скачать журнал) (скачать содержание) (аннотации)
Том 15 - 2021 (скачать журнал) (скачать содержание) (аннотации)
Том 16 - 2021 (скачать журнал) (скачать содержание) (аннотации)
Том 17 - 2022 (скачать журнал) (скачать содержание) (аннотации)
Том 18 - 2022 (скачать журнал) (скачать содержание) (аннотации)
Том 19 - 2022 (скачать журнал) (скачать содержание) (аннотации)
Том 20 - 2022 (скачать журнал) (скачать содержание) (аннотации)
Том 21 - 2023 (скачать журнал) (скачать содержание) (аннотации)
Том 22 - 2023 (скачать журнал) (скачать содержание) (аннотации)
Том 23 - 2023 (скачать журнал) (скачать содержание) (аннотации)"Automation and Measurement in Mechanical Engineering and Instrument Engineering" is a scientific journal devoted to current issues of science and technology. In the regular sections of the journal, the results of theoretical and experimental studies in the field of automation and control of technological processes and production, construction of models of complex technical systems, development of information-measuring systems and medical equipment products are published. The journal is intended for researchers, specialists, lecturers, graduate students and students specializing in solving fundamental and applied problems in the field of automation, mechanical engineering, instrument making, information technology and control.
The journal was founded on 12.10.2018.
ISSN (international Standard Serial Number): 2658-4727 (print)
Volume: up to 120 pages
The frequency of publication: 4 times a year
The journal is registered by the Federal Service for Supervision in the Field of Communications, Information Technologies and Mass Communications, certificate ПИ #ФС77-73958 dated 12.10.2018
The journal is included in the Russian Science Citation Index
Founder and publisher:
Federal State Autonomous Educational Institution of Higher Education "Sevastopol State University"
Journal policy:
Published materials undergo a review and expert selection procedure.
The authors are responsible for the integrity of facts, quotations, proper names, geographical names and other information. The editorial board is not responsible for the violation by the authors of the exclusive rights to the results of intellectual activity of third parties.
The opinion of the editorial board may not coincide with the opinion of the author.
When reprinting materials, a link to the journal "Automation and measurements in machine-instrument engineering" is mandatory.
Each issue of the journal (16 copies) is necessarily sent to the Russian Book Chamber.
The scientific journal is included in the "List of peer-reviewed scientific editions, in which the main results of dissertations for the degree of Candidate of sciences, for the degree of Doctor of sciences should be published", approved by the Higher Attestation Commission of the Ministry of Education and Science of the Russian Federation, in the following scientific specialties:
1.2.2. Mathematical modeling, numerical methods and software packages
2.2.8. Methods and devices for monitoring and diagnostics of materials, products, substances and the natural environment
2.3.3. Automation and control of technological processes and productions
Main sections:
Automation and control of processes and productions
Mathematical modeling, numerical methods and software packages
Measuring instruments and methods
Contacts:
Editorial office address: 33 Universitetskaya str., Sevastopol, 299053, editorial office of the journal "Automation and Measurement in Mechanical Engineering and Instrument Engineering"
E-mail: appr.sevgu@yandex.ru
Phone: 8 (8692) 43 50 02
Editor-in-chief of the scientific journal «Automation and measurement in mechanical engineering and instrument engineering» - Candidate of Technical Sciences, Docent Filipovich Oleg Viktorovich.
Graduated with honours from Sevastopol State Technical University in 1998 with a degree in Automation of Technological Processes and Productions. Started his career at the University in 2001, after graduating from full-time postgraduate studies. Candidate of Sciences (2006), Docent (2008). The total experience of teaching work at the university is 26 years.
The field of scientific interests: modelling and optimisation of processes of selective assembly of products. The theme of the doctoral dissertation – “Mathematical models of processes of multi-element single-parameter selective assembly” (speciality 1.2.2 Mathematical modelling, numerical methods and program complexes). The results of scientific and educational-methodical work are presented in 190 publications, including 3 monographs, 4 educational textbooks, 95 articles, 4 patents, 8 certificates of state registration of programmes. He has experience in management and participation in 10 scientific projects (state budget-funded research projects, basic part of the state task, internal grants of the university, RFBR grants).
He was awarded two honorary diplomas of the rector of Sevastopol State University for long-term and impeccable work in the university, high professional level in the organisation of the educational process and administrative activities.
EDITORIAL board:
– Editor–in-Chief: Filipovich O.V., Candidate of Technical Sciences, Docent, Sevastopol State University, Sevastopol
– Deputy Editor-in-Chief: Balakin A.I., Candidate of Technical Sciences, Docent, Sevastopol State University, Sevastopol
– Scientific editor: Bokhonsky A.I., Doctor of Technical Sciences, Professor, Sevastopol State University, Sevastopol
– members of the Editorial Board:
Vartanov M.V., Doctor of Technical Sciences, Professor, Moscow Polytechnic University, Moscow;
Grekov N.A., Doctor of Technical Sciences, Professor, Institute of Natural-Technical Systems, Sevastopol;
Doronina Yu.V., Doctor of Technical Sciences, Docent, Sevastopol State University, Sevastopol;
Zhmud V.A., Doctor of Technical Sciences, Docent, Siberian State University of Telecommunications and Informatics, Novosibirsk;
Krasnodubets L.A., Doctor of Technical Sciences, Professor, Sevastopol State University, Sevastopol;
Moiseev D.V., Doctor of Technical Sciences, Docent, Sevastopol State University, Sevastopol;
Obzherin Y.E., Doctor of Technical Sciences, Professor, Sevastopol State University, Sevastopol;
Osipov K.N., Doctor of Technical Sciences, Docent, P.S. Nakhimov Black Sea Higher Naval School of the Order of Red Star, Sevastopol;
Peschansky A.I., Doctor of Technical Sciences, Professor, Sevastopol State University, Sevastopol;
Petreshin D.I., Doctor of Technical Sciences, Professor, Bryansk State Technical University, Bryansk;
Preis V.V., Doctor of Technical Sciences, Professor, Tula State University, Tula;
Schenyatsky A.V., Doctor of Technical Sciences, Professor, M.T. Kalashnikov Izhevsk State Technical University, Izhevsk;
Zamoryonov M.V., Candidate of Technical Sciences, Docent, Sevastopol State University, Sevastopol;
Maistrishin M.M., Candidate of Technical Sciences, Docent, Sevastopol State University, Sevastopol;
Rapatsky Yu.L., Candidate of Technical Sciences, Docent, Sevastopol State University, Sevastopol.
RULES
submission, reviewing and publication of papers in
" Automation and Measurement in Mechanical Engineering and Instrument Engineering "
1. Scientific and technical papers reflecting the results of research conducted by the author (s), which should correspond to the subject matters of the journal, are accepted for publication.
2. Authors should provide original works containing reliable results of the scientific research done. When using text or graphic information borrowed from other papers, references to relevant publications are required. If the parts of the submitted manuscript have already been published, the authors should refer to the earlier paper, showing the difference between the new submission and the previous ones.
3. Submission of a paper to more than one journal is unacceptable and is regarded as unethical behavior of the authors.
4. For publication in the journal papers are submitted electronically:
• the text of the paper signed by all authors (program database file (PDF));
• the text of the paper (DOC or DOCX file);
• expert opinion on the possibility of publishing the paper content in open access (PDF);
• written recommendation of the supervisor (for graduate students, master and bachelor degree students who submit a paper without co-authors) (PDF);
• a package of figures (TIFF, JPG files with 300 dpi at least).
Requirements for the content of the article
The article submitted for publication must:
• be relevant, have novelty;
• contain a statement of tasks (problems), a goal, a description of the main research results obtained by the author, conclusions;
• correspond to the subject of journal and the design requirements (template).
The submitted articles are checked in the "Anti-Plagiarism" program. The maximum permissible level of unformulated borrowing links is up to 30% of the text of the article.
The procedure for articles submission
The manuscript of the article must be submitted by one of the co-authors who assumes responsibility for the article during its submission and review.
The editorial board accepts previously unpublished scientific articles by e-mail to the editorial office (appr.sevgu@yandex.ru) without limitation during the year and in case of a positive review includes in the next issue of the journal in the order of receipt.
Graduate students and students who publish articles without co-authors-supervisors, together with the text of the article, provide a written recommendation to the editorial board of the journal, which must be signed by the supervisor.
Refusal to publish
Not allowed for publication:
• articles that are not designed in accordance with the requirements, the authors of which refuse to technically refine the articles;
• articles whose authors do not fulfill the constructive comments of the reviewer or do not refute them in a reasoned manner.
The procedure for reviewing articles
1. The Editorial Board undertakes to maintain the confidentiality of the reviewers' personal data. It is possible to disclose the name of the reviewer at his request. The article is submitted to the reviewer without specifying any information about the authors.
2. The manuscripts of all articles submitted to the editorial office are subject to mandatory review.
3. When choosing a reviewer, the expert's publications on the subject of the reviewed work within the last three years are taken into account. The review may be carried out by members of the editorial board of the journal. Specialists with recognized authority and working in the field of knowledge to which the content of the manuscript relates are involved in external review.
4. The original reviews are kept in the editorial office for five years from the date of publication of the articles.
5. The editorial board of the publication sends copies of reviews or a reasoned refusal to the authors of the submitted materials, and also undertakes to send copies of reviews to the Ministry of Science and Higher Education of the Russian Federation when the corresponding request is received by the editorial office of the publication.
6. The review of articles is carried out on a voluntary and gratuitous basis. Reviewers are notified that the manuscripts sent to them are the intellectual property of the authors and relate to information not subject to disclosure. Reviewers are not allowed to make copies of the manuscript of the article for their own needs, as well as to transfer the manuscript in whole or in part to third parties.
7. The review procedure is confidential. The review is provided to the author of the manuscript without a signature and indication of the surname, position, place of work of the reviewer. The editorial board does not disclose information concerning the manuscript (including information about its receipt, content, review process, critical comments of reviewers and final decision) to anyone except the authors and reviewers themselves.
Review deadlines
The terms of reviewing in each individual case are determined by the executive secretary, taking into account the creation of conditions for the most expeditious publication of the article. The maximum review period is three weeks.
The content of the review
The review is compiled in a free form, with mandatory coverage of the following provisions:
• compliance with the subject of the journal;
• the relevance of the topic and the validity of the problem statement;
• the presence of scientific novelty, theoretical and practical significance of the work;
• evaluation of the main research results;
• compliance of conclusions with the purpose and objectives of the study;
• the degree of structuring of the article material;
• the quality of the article design.
If the manuscript does not meet one or more criteria, the reviewer indicates in the review the need to finalize the article and gives recommendations to the author to improve the manuscript (indicating the inaccuracies and errors made by the author). The comments and suggestions of the reviewer should be objective and principled, aimed at improving the scientific and methodological levels of the manuscript. The review is signed by the reviewer, whose signature is stamped.
The editorial board informs the author of the review result. Articles modified by the author are re-sent for review to the same reviewer who made critical comments. The article sent to the author for revision must be returned in the corrected form as soon as possible, but no later than two weeks after the author receives the review. The revised manuscript must be accompanied by a letter from the authors containing answers to all comments and explaining all the changes made in the article. The Editorial Board reserves the right to reject articles if the author is unable or unwilling to take into account the wishes of the reviewer, as well as in case of receiving an amended version of the manuscript, later than a month after receiving the first review.
In case of a negative evaluation of the manuscript as a whole (recommendation on the inexpediency of publication), the reviewer must justify his conclusions. An article not recommended for publication by the reviewer is not accepted for reconsideration. The text of the negative review is sent to the author by e-mail.
The deadline for making a decision on publication is no more than a month.
Procedure for articles consideration
1. Articles are registered in the order of receipt to the editorial office and published according to the established schedule.
2. The Editorial Board sends the article for review.
3. The Editorial Board is authorized to carry out scientific and literary editing of the received materials, if necessary, shorten them in agreement with the author or send the article for revision.
4. The Editorial Board reserves the right to reject an article that does not meet the established requirements or the subject of the journal, as well as if the recommendations of the reviewers are not fulfilled more than twice. In case of rejection of the submitted article, the editorial board gives the author a reasoned conclusion.
5. The editorial board informs the authors about the results of the review and compliance with the requirements within two weeks after the registration of the article.
6. Articles that have received a positive review are published in the next issue of the journal in the order of receipt.
Volume 1 - 2018 (Download the journal) (Download content) (Download abstract)
Volume 2 - 2018 (Download the journal) (Download content) (Download abstract)
Volume 3 - 2018 (Download the journal) (Download content) (Download abstract)
Volume 4 - 2018 (Download the journal) (Download content) (Download abstract)
Volume 5 - 2019 (Download the journal) (Download content) (Download abstract)
Volume 6 - 2019 (Download the journal) (Download content) (Download abstract)
Volume 7 - 2019 (Download the journal) (Download content) (Download abstract)
Volume 8 - 2019 (Download the journal) (Download content) (Download abstract)
Volume 9 - 2020 (Download the journal) (Download content) (Download abstract)
Volume 10 - 2020 (Download the journal) (Download content) (Download abstract)
Volume 11 - 2020 (Download the journal) (Download content) (Download abstract)
Volume 12 - 2020 (Download the journal) (Download content) (Download abstract)
Volume 13 - 2021 (Download the journal) (Download content) (Download abstract)
Volume 14 - 2021 (Download the journal) (Download content) (Download abstract)
Volume 15 - 2021 (Download the journal) (Download content) (Download abstract)
Volume 16 - 2021 (Download the journal) (Download content) (Download abstract)
Volume 17 - 2022 (Download the journal) (Download content) (Download abstract)
Volume 18 - 2022 (Download the journal) (Download content) (Download abstract)
Volume 19 - 2022 (Download the journal) (Download content) (Download abstract)
Volume 20 - 2022 (Download the journal) (Download content) (Download abstract)
Volume 21 - 2023 (Download the journal) (Download content) (Download abstract)
Volume 22 - 2023 (Download the journal) (Download content) (Download abstract)
Volume 23 - 2023 (Download the journal) (Download content) (Download abstract)
Volume 24 - 2023 (Download the journal) (Download content) (Download abstract)
Volume 25 - 2024 (Download the journal) (Download content) (Download abstract)
Volume 26 - 2024 (Download the journal) (Download content) (Download abstract)
Volume 27 - 2024 (Download the journal) (Download content) (Download abstract)
Volume 28 - 2024 (Download the journal) (Download content) (Download abstract)